Avery 9860 Betriebsanleitung PDF herunterladen (Seite 29)

Channel

This option selects the channel on which your network devices

communicate. All devices must be on the same channel to communicate.

Other radio devices such as Bluetooth wireless devices, microwave

ovens, or 2.4-gigahertz cordless phones may operate on the same

channel as your network. Channels 1-11 are available. Use the channel

for Ad-Hoc mode. In infrastructure mode, the channel is negotiated with

the access point and this setting is ignored.

Note: Make sure all network devices are set to the same channel.

From the Main Menu: Select Setup, Network, Wireless. Then follow

these steps.

1. Press  or  until you see

WIRELESS

 Channel 

2. Press Enter/Pause. The current setting is displayed, for example:

Channel

[1/11] +5

3. Press  or  to change the setting. After you display the option you

need, press Enter/Pause.

4. Press Escape/Clear until you see the Main Menu.

Note: If you have problems connecting to your network, change the

channel to at least three channels lower or higher than any other

wireless networks within range.

Configuring the 802.11b/g and IP Settings 2-13

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 113 114

Keine Kommentare

Avery 9860 Betriebsanleitung Seite 29