Avery 9860 Betriebsanleitung PDF herunterladen (Seite 24)

The options are listed in the table below.

Option Choices

Signal Strength 0 to 100

SSID xxxxxxxxxxxxxx

Wireless Mode Infrastructure or Ad-Hoc

APoint Density Low/Med/High

Transmit Rate 1/2/5.5/11/12/18/24/36/48/54

Channel 1 to 11

Signal Strength

The connection between the device and access point is shown as signal

strength, which is a percentage from 0 to 100, where 0 is no connection

and 100 is an excellent connection. A percentage below 30 indicates

you may be experiencing interference or are close to being out of the

access point’s range. With a percentage below 50, printing performance

could be affected. If the signal strength is low, increase the number of

retries. To improve the signal strength, try moving the printer closer to

the access point and away from other radio devices such as Bluetooth

wireless devices, microwave ovens, or 2.4-gigahertz cordless phones.

Note: If the printer is not communicating with the print server’s network

card, the Network Menu options do not appear.

To view the signal strength, from the Main Menu: Select Setup,

Network, Wireless. Then follow these steps.

1. Press  or  until you see

WIRELESS

Signal Strength 

2. Press Enter/Pause. The current setting is displayed, for example:

Signal Strength

100

3. Press Escape/Clear until you see the Main Menu.

2-8 MonarchNet2 Operating Instructions

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 113 114

Keine Kommentare

Avery 9860 Betriebsanleitung Seite 24