Avery 9860 Betriebsanleitung PDF herunterladen (Seite 19)

IP Address

The IP (Internet Protocol) Address is a unique identifier for a device on a

network. It consists of four 3-digit numeric fields, separated by periods.

To change the setting, from the Main Menu: Select Setup, Network.

Then follow these steps.

1. Press  or  until you see

NETWORK

 IP Address 

2. Press Enter/Pause. The current setting is displayed, for example:

IP Address

192.0.192.0

3. Press  or  to move through the positions. Press Feed/Cut to

scroll one digit at a time from 0-9. After you display the option you

need, press Enter/Pause.

For example, to change the IP address from 192 to 000, press

 or  to highlight the first position and press Feed/Cut until you

see 0

, then press  to select the next position and press

Feed/Cut until you see 0

, then press  to select the next position

and press Feed/Cut until you see 0

. Press Enter/Pause to save

the setting or press Escape/Clear to exit without saving.

If you enter a series of digits greater than 255 for any segment of

the IP address and press Enter/Pause, the printer does not save

the setting. However, no error appears on the display.

Correct the IP address and then press Enter/Pause to save the

setting.

4. Press Escape/Clear until you see the Main Menu.

Configuring the 802.11b/g and IP Settings 2-3

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 113 114

Keine Kommentare

Avery 9860 Betriebsanleitung Seite 19