Avery 9860 Betriebsanleitung PDF herunterladen (Seite 25)

SSID

The Service Set Identifier (SSID) is a unique identifier that must match

for all nodes on a subnetwork to communicate with each other.

It consists of up to 32 characters (any printable character, including

spaces). If using the space character, it must be enclosed in quotation

marks.

Note: The SSID is case-sensitive.

To change the setting, from the Main Menu: Select Setup, Network,

Wireless. Then follow these steps.

1. Press  or  until you see

WIRELESS

 SSID 

2. Press Enter/Pause. The current setting is displayed, for example:

SSID

ABC1234

3. Press  or  to move through the positions. Hold Feed/Cut to scroll

quickly through the characters from 0-9;A-Z;a-z or press Feed/Cut

once to scroll one character at a time. After you display the

character you need, press Enter/Pause. You must press

Enter/Pause after each character to save the change and continue.

To clear the SSID, press  and  at the same time when you are

at the end of the SSID field. If you are in the middle of the field

and you press  and  at the same time, any characters to the

right of the cursor are cleared.

Note: If using the Monarch 9860 printer with the attached Monarch

939 keyboard, you may simply enter the SSID you need using

the numeric keys and press Enter.

4. Press Escape/Clear until you see the Main Menu.

Configuring the 802.11b/g and IP Settings 2-9

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 113 114

Keine Kommentare

Avery 9860 Betriebsanleitung Seite 25