Avery ALS 256 Bedienungsanleitung PDF herunterladen (Seite 37)

CONTENTS

3.2 INSERTING LABEL MATERIAL

ALS

20x

256

3.2.2 Inserting a label roll

WARNING!

Risk of injury due to moving and rapidly

rotating parts!

£ Before inserting the label roll, ensure that

the device is turned off at the main

switch.

£ Do not under any circumstances turn the

device on before the label strip is

threaded in completely.

Removing spent backing paper

Assuming backing paper has gathered on the rewinder

[32A] :

£ Press the release button [32B].

– The tensioning mechanism of the rewinder is

slackened.

£ Remove the rewound backing paper.

Removing glue residue

£ If necessary, clean the following components:

– Dispensing plate

– Deflection rollers

– Drive rollers

– Pressure roller

£ Follow the directions provided in section

“Maintenance and cleaning” on page 47.

Inserting a new label roll

£ Push the material roll [33A] onto the unwinder as far

as it will go.

£ Rotate the rotary knob [33B] in a clockwise direction

until the label roll sits tightly.

£ Run the label strip around the dancer arm as shown

in the figure [33C].

[32] A Rewound backing paper

B Release button

C Backing paper path

[33] Inserting the material roll – Part 1.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 57 58

Keine Kommentare

Avery ALS 256 Bedienungsanleitung Seite 37